Mainos / Advertisement:

Ero sivun ”Cellmapper/en” versioiden välillä

Kohteesta Taisto
Siirry navigaatioon Siirry hakuun
(Ak: Uusi sivu: Cellmapper's servers calculate the data the users have sent and creates a graphical representation of it in the map delivered by Google Maps, which can be browsed directly from the...)
(Ak: Uusi sivu: The application supports real time transfer, so the data collected is sent to Cellmapper's servers as you measure. You can also manually send the data after measuring or resend alr...)
Rivi 4: Rivi 4:
 
Cellmapper's servers calculate the data the users have sent and creates a graphical representation of it in the map delivered by Google Maps, which can be browsed directly from the application or Cellmapper's webpage. The model can not account for certain variables though, so in order to get reliable data one should keep the measuring phone in as clear and unobstructed area as possible. An ideal measuring setting is as unobstructed as possible, such as large fields of prairie, but for instance in cities obstacles are unavoidable. When measuring one should move in 1/2-3/4 circles at different distances around the presumed base station in order to get the most accurate results.
 
Cellmapper's servers calculate the data the users have sent and creates a graphical representation of it in the map delivered by Google Maps, which can be browsed directly from the application or Cellmapper's webpage. The model can not account for certain variables though, so in order to get reliable data one should keep the measuring phone in as clear and unobstructed area as possible. An ideal measuring setting is as unobstructed as possible, such as large fields of prairie, but for instance in cities obstacles are unavoidable. When measuring one should move in 1/2-3/4 circles at different distances around the presumed base station in order to get the most accurate results.
  
Ohjelma tukee reaaliaikaista lähetystä, jolloin puhelimen keräämä data lähetetään Cellmapperin palvelimelle mittauksen lomassa. Voit myös lähettää datan mittauksien jälkeen, sekä uudelleenlähettää jo kerättyä dataa. Tiedostojen latauduttua palvelimelle, palvelin käsittelee ne muutamassa minuutissa, jos kuormitus on vähäistä. Jos palvelin on kovan kuormituksen alla, voi datan käsittely kestää useita tunteja - jopa päivän. Käsittelynopeuden hidastuminen on tiedostettu ongelma, jota on tulevaisuudessa on tarkoitus nopeuttaa.
+
The application supports real time transfer, so the data collected is sent to Cellmapper's servers as you measure. You can also manually send the data after measuring or resend already collected data. After the files have been sent to the server, they are processed within minutes if there is not much load on the servers at the moment. If the servers are under heavy load then processing data can take up to hours or even a full day. The decay of processing speed is a known issue, and will be addressed in the future.
  
 
Cellmapper does not work on Windows Phone or iOS devices since the software they use prevents using the network API. Part of Cellmappers features require rooting your android.
 
Cellmapper does not work on Windows Phone or iOS devices since the software they use prevents using the network API. Part of Cellmappers features require rooting your android.

Versio 28. elokuuta 2015 kello 07.46

Muut kielet:
English • ‎suomi

Cellmapper is a useful application for locating 2G/3G/4G base stations. Cellmapper's maps are automatically updated by users who broaden the database by using the application.

Cellmapper's servers calculate the data the users have sent and creates a graphical representation of it in the map delivered by Google Maps, which can be browsed directly from the application or Cellmapper's webpage. The model can not account for certain variables though, so in order to get reliable data one should keep the measuring phone in as clear and unobstructed area as possible. An ideal measuring setting is as unobstructed as possible, such as large fields of prairie, but for instance in cities obstacles are unavoidable. When measuring one should move in 1/2-3/4 circles at different distances around the presumed base station in order to get the most accurate results.

The application supports real time transfer, so the data collected is sent to Cellmapper's servers as you measure. You can also manually send the data after measuring or resend already collected data. After the files have been sent to the server, they are processed within minutes if there is not much load on the servers at the moment. If the servers are under heavy load then processing data can take up to hours or even a full day. The decay of processing speed is a known issue, and will be addressed in the future.

Cellmapper does not work on Windows Phone or iOS devices since the software they use prevents using the network API. Part of Cellmappers features require rooting your android.

While using cellmapper, pay attention to:

  • Battery consumption rise (looks for GPS signals and checks network quality)
  • Screen won't turn off while application is running (More battery consumption!)
  • Base station location in urban areas is best determined by doing round trips of city blocks. At more rural locations you should do larger sweeps to save time. You will get the best result on flat ground.
  • Ensure that you have a sufficiently good connection to the base station as well as a GPS connection.

Cellmapper is constantly being developed and the changelogs and devlogs can be found on their webpages: https://www.cellmapper.net/mw/index.php/Feature_Requests

Here is a direct link to their FAQ: https://www.cellmapper.net/mw/index.php/FAQ

If you have something to ask about cellmapper, you should contact the developer directly https://plus.google.com/communities/101488064885764774600


Scanning

1. Download for Android Cellmapper application.

2. Enable GPS (not Google's location service)

Location services can be enabled in Samsung devices in : Settings -> Location services -> Use GPS satellites

3. Start the application. Ensure that you are connected to the 2G/3G/4G base station that you wish to measure. You need to have a data plan / contract with the operator, whose connection you wish to measure.

Screenshot 2015-05-25-15-53-57.png

In the Cell List tab you can see if GPS has been connected properly (GPS OK) as well as your base stations information.

In the picture we have connected to "Cell 140296" base station in an LTE network. GPS has determined location by 4 meters accuracy and 14 out of 19 satellites have been connected to.

Abbrevation Explanation Example
Cell Cell ID, this is used to differentiate between cells Cell 555
Sector The sector number of the cell Sector 1
MCC Mobile network country code 244 (Finland)
MNC Mobile network operator code 5 (Elisa)
RSRQ (Reference Signal Received Quality ) Signal receive quality
SINR (Signal to Noise Ratio) SINR value scale is -20 - +30 dBm, the bigger the better. Signal strength is average when it goes above 15dBm, maximum speed is 50Mbps. One must have roughly 25dBm if he wants to have 100Mbps speeds.
RSRP (Reference Signal Received Power) Signal strength. -50dBm is the best, it is good to have -90dBm and -110dBm is weak. When the signal is better than -90dBm we can monitor the SINR value alone.
RSSI (Received Signal Strength)

4. Maps tab

Kartta aukeaa vasemmalta valikosta.

Screenshot 2015-05-25-15-54-27.png

In the maps tab you can see the location of already mapped base stations. The application will automatically only show the base stations of the current network (LTE in the picture). The location of base stations can also be viewed from the Cellmapper webmap.

The base station is marked on the map as a red dot in mobile and a red arrow in a browser. A blue dot refers to your own location and the black line tells you which station you are connected to. By clicking on the base station you can see it's range as a black zone. Light green indicates best signal quality, dark green good quality, black average quality and red the weakest signal quality.

Screenshot 2015-05-25-15-56-16.png

By pressing Select Provider you can switch the operator and network you wish to measure.

Put a tick into Record Data so that you measurements will be collected for uploading.

Screenshot 2015-05-25-15-55-15.png

Lähetä tiedot palvelimelle

5. Upload your recorded data to the Cellmapper server by opening the Cell List tab and Upload and Statistics tab. You should always upload your newly measured base station so that somebody else won't have to go and redo it, and they can instead view it from the map. The cellmapper map is updated nearly instantaneously .

Screenshot 2015-05-25-15-55-26.png


6. Press on the Upload icon after this and the data will be sent to the server. We recommend that you also turn on the Enable instant upload feature from the settings, so you don't have to press the button every time.

7. Close cellmapper after use so it won't drain your whole battery.

Screenshot 2015-05-25-15-54-35.png

Lähetä data palvelimelle uudelleen

Lataa tiedot Cellmapperin palvelimelle avaamalla valikosta Upload and Statistics.

Screenshot 2015-08-25-21-27-13.png

Avaa valikko ja valitse Re-Upload.

Screenshot 2015-08-25-21-27-42.png

Valitse aloitusajankohta

Screenshot 2015-08-25-21-27-53.png

Valitse päättymisajankohta. Valitsemalla OK ohjelma alkaa lähettämään valitulta aikaväliltä tallennettua dataa uudelleen palvelimelle, jos datayhteys Internetiin on saatavilla. Datan määrästä riippuen tämä kestää muutamasta sekunnista muutamaan minuuttiin.

Settings

Automatic data upload

This enables the cellmapper application to automatically transmit data to the cellmapper servers that you have collected of a base station.

Open the application settings and put a tick in Enable Instant Upload.

Screenshot 2015-05-25-15-54-06.png

Show base stations on the map

This function shows base stations on the map. By default this feature is enabled.

Show inaccurate base stations

This feature shows inaccurately measured base stations on the map. Inaccurate base stations are stations which only have one cell or stations that have not been measured properly due to low signal values. You can improve the accuracy by measuring the station in closer proximity to it. Other overlapping base stations can also be inaccurately measured automatically as you are trying to measure some other station. You can also make a station accurate by manually locating it correctly on the map. This feature is disabled by default.

Android Cell ID API 4.2

This feature only works in Android 4.2 and Cell ID API 4.2 supported devices. Most manufacturers (such as Google) do no support this feature, so it is unlikely that your device will. Although, many new Samsung, LG and Sony devices support this feature. OnePlusOne gives incorrect information when measuring 3G, but the 2G and LTE network measuring works fine.

Check if your device supports this feature: https://www.cellmapper.net/mw/index.php/Android_4.2_CellID_Support

You can test the feature to see if it works correctly on your device. This requires restarting the application.

API 4.2 advantages:

  • Enables turning off your screen during measuring
  • Enables measuring and logging several cells at the same time from the same operator's network. This method can have some hiccups and bugs, so most stations measured this way will be shown as inaccurate base stations.

Here is the OnePlusOne phone 3G network measuring bug. As we said earlier, the 2G and LTE measurings work as normal.

Screenshot 2015-08-05-22-34-14.png

Check GPS age

This feature checks that your GPS information is fresh. We recommend enabling this.

Frequencies

Cellmapper can measure the frequencies of mobile networks using Samsung's field test mode. This requires root privileges. Rooting removes warranty! After you have root privileges, you enable Read logcat for Samsung Field Test Data from cellmapper's settings. Sonera's and DNA's LTE frequencies are automatically updated on the browsers map so you won't need this feature on their networks. Elisa's LTE is not automatized like this so it requires a rooted Samsung phone to measure. This will not work on custom ROMs. You can "call" the number *#0011# to see the band number. In Finland mainly LTE band 20 (800Mhz) and 3 (1800Mhz) are used.

Screenshot 2015-07-11-16-22-45.png

Operator's LTE sectors and corresponding frequencies.

Operator Sector Frequency Other
DNA 1, 2, 3 1800Mhz
DNA 10, 20, 30, 40 800Mhz
Elisa 1, 2, 3 800Mhz / 1800Mhz
Elisa 4, 5, 6 2600Mhz
Sonera 11, 21, 31 1800Mhz
Sonera 12, 22, 32 800Mhz
Sonera 10, 20, 30 2600Mhz
Sonera and DNA 13 800Mhz Shared network
Sonera and DNA 23, 33 1800Mhz Shared network

Users

Cellmapper collects information about your client device, for instance location, make and model, operator and other network information. You can view the precise list on cellmapper's website.

You can register an account for the cellmapper application and log in to it easily. Registering an account doesn't take much, just a username, e-mail and password. You can see your login state from Cells: Login OK .

Screenshot 2015-05-25-15-55-05.png

Web browser map

You can easily access the cellmapper web map using your browser at https://www.cellmapper.net/map

From the left you can select Country, Provider/Operator and Network.

Celllmapper map 1.png


After filling those in the map will load already mapped stations found by your criteria. We selected Finland, Sonera and LTE and took a glance at the Turku map.

Celllmapper map 2.png

From the menu on the left you can select which frequencies are shown by clicking bands. This feature works only if the providers network allows measuring them, such as Sonera LTE and DNA LTE. You can also select Show low Accuracy Towers to see more base stations. These stations are either inaccurate and can only have one or two cells. Also weakly measured stations won't be shown without this filter, until they have been measured more accurately.


By the colours you can see the signal strength. Light green means good connection and dark green OK connection. Red means really shitty connection. If there's black it means there is no connection at all. Celllmapper map 3.png

Click on a base station to get more information about it. On the left for instance you can see when it was first and last measured, the best signal established to a cell (RSPR) and the frequency, if available. Most commonly base stations have three cells which point off to different directions. If a base station is marked in the wrong place on the map and you know the correct and precise location, you can move the base station by logging in under Edit Site Data and pressing Click here to log in. Username and password are the same as in the cellmapper application, so this requires registration.

In Extra Data you can write more information about the base station in question or other things. You can also attach a picture of the station if you so desire. Credentials to do this should be sought out from the cellmapper community.

Error messages

Here are collected some error messages we have encountered and explanations for them.

GPS Error

GPS Error is caused by not having your GPS turned on. Turn it on from your phone's settings. Cellmapper can't measure stations without GPS. When measuring, you should check that cellmapper says GPS Fix OK. This ensures that the data is correct. Google's location service is a different thing than GPS based location services.

Location services can be enabled in Samsung devices in : Settings -> Location services -> Use GPS satellites.

Screenshot 2015-07-11-16-22-28.png

Mainos / Advertisement: