Mainos / Advertisement:

Ero sivun ”USB-Asennus/en” versioiden välillä

Kohteesta Taisto
Siirry navigaatioon Siirry hakuun
(Ak: Uusi sivu: In "Step 3:" we enter the path of the image, just find the image where you placed it on your computer. Select the image file by double clicking it.)
(Ak: Uusi sivu: After you have punched in all of the selections, hit the "Create" button. The program will prompt you for confirmation, to which you will answer "Yes". YUMI will now start to creat...)
 
(Yhtä välissä olevaa versiota samalta käyttäjältä ei näytetä)
Rivi 18: Rivi 18:
 
In "Step 3:" we enter the path of the image, just find the image where you placed it on your computer. Select the image file by double clicking it.
 
In "Step 3:" we enter the path of the image, just find the image where you placed it on your computer. Select the image file by double clicking it.
  
Kun olet valinnut USB-laitteesi, voit myös ruksia laatikon ”Format Drive (Erase Content)?” jos haluat formatoida (tyhjentää) tikkusi ennen tallennusta. Suositeltavaa. HUOM. Kaikki tikulla oleva katoaa jos formatoit tikun, joten varmista ettei tärkeitä tietoja katoa kankkulan kaivoon.
+
After you have selected which USB device you wish to use, you can also select the box "Format Drive (Erase Content)?" if you wish to format (completely empty!) your flash drive before proceeding with the image installation. This is recommended, the process might not be successful if you don't. '''NOTE! All data that is stored on the flash drive will be lost upon formatting the drive!''' Save any data you do not wish to lose before proceeding.
  
  
Rivi 25: Rivi 25:
  
  
Kun olet asettanut kaikki tiedot paikalleen, paina ”Create”-nappulaa. Ohjelma pyytää vielä varmistuksen, jonka hyväksyt painamalla ”Yes”. Ohjelma alkaa nyt luomaan bootattavaa tikkua. Odota, että ohjelma on raksuttanut loppuun, voit sillä aikaa hakea vaikka kahvia. Ohjelman valmistuttua paina ”Next”. Tämän jälkeen ohjelma kysyy haluammeko pistää lisää imageja tikulle samantien, mutta me emme halua ja vastaamme ”No”. Tämän jälkeen painamme ”Finish” ja tikku on valmis. [https://www.youtube.com/watch?v=6Au6p1MsbGQ Tutturuu!]
+
After you have punched in all of the selections, hit the "Create" button. The program will prompt you for confirmation, to which you will answer "Yes". YUMI will now start to create your bootable USB stick. Wait for YUMI to complete the process, you might want to get a coffee in the meantime. After the process is finished, hit "Next". After this, YUMI will ask us if we want to add more images on the flash drive right now, but we don't. Press "No". After that we just press "Finish" and your bootable flash drive is ready for use! [https://www.youtube.com/watch?v=6Au6p1MsbGQ Tutturuu!]

Nykyinen versio 23. heinäkuuta 2015 kello 07.58

Muut kielet:
English • ‎suomi

In this manual we will create a bootable USB flash drive. We will put a windows operating system image on the flash drive, but you can use this same procedure with nearly any other operating system or utility disc images.

You will need:

  • A flash drive with sufficient space for the image. For 32-bit windows a 4GB stick will suffice and for 64-bit an 8GB will suffice.
  • The windows disc image.
  • YUMI (Your Universal Multiboot Installer) software, which you can get from http://www.pendrivelinux.com

Start YUMI and proceed to this screen:

Yumi 1.png


In "Step 1:" we choose which flash drive or other USB device we want to use.

In "Step 2:" we select what image we want to put on the flash drive.

In "Step 3:" we enter the path of the image, just find the image where you placed it on your computer. Select the image file by double clicking it.

After you have selected which USB device you wish to use, you can also select the box "Format Drive (Erase Content)?" if you wish to format (completely empty!) your flash drive before proceeding with the image installation. This is recommended, the process might not be successful if you don't. NOTE! All data that is stored on the flash drive will be lost upon formatting the drive! Save any data you do not wish to lose before proceeding.


Yumi 2.png


After you have punched in all of the selections, hit the "Create" button. The program will prompt you for confirmation, to which you will answer "Yes". YUMI will now start to create your bootable USB stick. Wait for YUMI to complete the process, you might want to get a coffee in the meantime. After the process is finished, hit "Next". After this, YUMI will ask us if we want to add more images on the flash drive right now, but we don't. Press "No". After that we just press "Finish" and your bootable flash drive is ready for use! Tutturuu!

Mainos / Advertisement: